F 450 2WD Super Duty V10-6.8L VIN V (2005)
Removal and Installation
All vehicles
1. Drain the engine cooling system.
4WD vehicles
2. Remove the front drive axle assembly.
All vehicles
3. Remove the LH engine mount.
4. Remove the 3 bolts and position the power steering pump assembly aside.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. Disconnect the lower radiator hose from the oil filter adapter and position it aside.
6. Disconnect the degas bottle hose from the oil filter adapter and position it aside.