F 450 2WD Super Duty V10-6.8L VIN V (2005)
Install the transmission mount-to-crossmember nuts.
^
Tighten to 25 Nm (18 ft. lbs.).
13. Install the transmission cooler tube support bracket and the nut.
^
Tighten to 10 Nm (89 inch lbs.).
14. Install the 4 exhaust manifold flange nuts.
^
Tighten to 40 Nm (30 ft. lbs.).
15. If the vehicle is equipped with TSS and turbine/OSS, remove the plugs and install the sensors in the transmission.
16. Install the starter.
17. Install the generator.
18. Install the cooling fan shroud.
19. Install the air cleaner outlet tube.
20. Fill the crankcase with clean engine oil.
