F 450 2WD Super Duty V10-6.8L VIN V (2005)
9. Tighten the evaporator core housing support bracket bolts.
10. NOTE: Vehicle with manual climate control shown, vehicles with EATC similar.
Connect the electrical connectors.
11. NOTE: Install new O-ring seals.
Connect the A/C fittings.
1
Connect the auxiliary evaporator outlet line fitting (if equipped).
2
Connect the auxiliary evaporator inlet line fitting (if equipped).
3
Connect the evaporator inlet line fitting.
12. Position the sensor bracket and install the nuts.
