F 450 2WD Super Duty V10-6.8L VIN V (2005)
5. Disconnect the condenser to evaporator line from the A/C evaporator core.
6. Remove the eight pin-type retainers and the sight shield.
7. Disconnect the condenser-to-evaporator line from the A/C condenser core and remove the line.
-
Discard the O-ring seals.
8. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
9. Evacuate, leak test and charge the refrigerant system.