F 450 2WD Super Duty V10-6.8L VIN V (2005)
5. Twist the tilt wheel handle and shank and remove.
6. Remove the steering column opening lower finish panel.
1
Turn the retaining clips a quarter-turn counterclockwise to release.
2
Remove the steering column opening lower finish panel.
7. Remove the lower steering column shroud.
1
Remove the three screws.
2
Remove the steering column shroud.
8. Remove the ignition switch lock cylinder.
1
Position the lock cylinder to RUN.
2
Using a suitable tool, push upward on the cylinder release tab while pulling the cylinder outward.