F 450 2WD Super Duty V10-6.8L VIN V (2005)
2. Remove the safety belt buckle.
1
Remove the safety belt buckle nut.
2
Remove the safety belt buckle.
3. Remove the cap from the safety belt nut.
4. Remove the safety belt tongue.
1
Remove the safety belt nut.
2
Remove the safety belt.
Installation
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten nuts to specification.
1. Install the safety belt.
1
Position the safety belt in the retaining straps.
2
Position the safety belt anchor.
3
Install the nut.