F 450 2WD Super Duty V10-6.8L VIN V (2005)
Seat Belt Height Adjuster: Service and Repair
Safety Belt Shoulder Height Adjuster
SAFETY BELT SHOULDER HEIGHT ADJUSTER
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal
NOTE: Crew Cab shown, regular cab similar.
1. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Remove the shoulder safety belt guide nut.
3
Remove the shoulder safety belt guide.
2. Remove the front door scuff plate, the rear door scuff plate, the rear assist handle and the center body pillar trim panel.