F 450 2WD Super Duty V10-6.8L VIN V (2005)
Remove the safety belt retractor.
1
Remove the bolt
2
Remove the safety belt retractor through the back of the seat.
-
Route out the safety belt, guide, tongue and anchor.
Installation
All seats
1. NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Route the safety belt anchor, tongue, web guide and safety belt up through the opening at the safety belt guide.
2. Install the safety belt retractor.
1
Align the tab into the seat backrest bracket.
2
Install the bolt.
3. NOTE: Prior to installation, make sure the safety belt webbing is not twisted.
Install the safety belt anchor and nut.
-
Make sure the anti-rotation tab is correctly positioned into the seat frame.