F 450 2WD Super Duty V10-6.8L VIN V (2005)
Shift Solenoid: Service and Repair
Shift Solenoids (SS)
Shift Solenoids (SS)
Removal and Installation
NOTE: Some solenoid body bolts and wire loom bolts will need to be removed in order to remove affected solenoids.
NOTE: The line pressure solenoid is not serviced in the vehicle. The solenoid body will need to be removed to remove line pressure solenoid. For
additional information, refer to Solenoid Body Assembly.
1. Remove the transmission fluid pan, gasket and filter. For additional information, refer to Fluid Pan, Gasket and Filter.
2. Disconnect the affected shift solenoid electrical connector.
3. Remove the affected shift solenoid.
1. Remove the retaining "E" clip.
2. Remove the affected shift solenoid.
4. To install, reverse the removal procedure.
