F 450 2WD Super Duty V10-6.8L VIN V (2005)
16.
For vehicles equipped with a PTO, install the overdrive pressure plate. See Figure 53.
1)
Install the larger tab positioned at the top of the case.
2)
Install the square end of the plate in the bottom of the case.
^
The P10 pressure plate anti-rotation tab is installed into the 6 o'clock position of the snap ring.
17.
Install the overdrive clutch. See Figure 54.
^
Start with a friction plate, alternating with a steel plate.
18.
Install a new pump gasket. See Figure 55.