ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor|Page 5744 > < Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor|Page 5742

F 450 2WD Super Duty V10-6.8L VIN V (2005)

Page 3
background image

6. Install the RH crossmember bolts.

7. Install the bracket and loosely install the bolts.

8. Tighten the RH crossmember bolts.

9. Tighten the transmission insulator and retainer nuts.

10. Install the wire harness and install the two retaining clips to the rear of the crossmember.

Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor|Page 5744 > < Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor|Page 5742