F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
9. Remove the High Lift Transmission Jack and the special tool from the transmission.
10. Reinstall the transmission pan-to-case bolts that were removed to install the E40D Transmission Jack Adapter.
11. If the vehicle is equipped with TSS and turbine/OSS, remove the plugs and install the sensors in the transmission.
12. Install the flywheel inspection plate.
13. Install the dual converter Y-pipe.
14. Install the oil bypass filter.
15. Lower the vehicle.
16. Align the engine mount studs and lower the engine, using the Heavy Duty Engine Support.
17. Remove the Heavy Duty Engine Support.
18. Raise and support the vehicle.