F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
5. Remove the EVAP canister.
6. Remove the canister vent solenoid from the EVAP canister, if equipped.
7. Remove the EVAP canister elbow.
INSTALLATION
1. To install, reverse the removal procedure.
^
Leak test the EVAP system. See: Testing and Inspection/Component Tests and General Diagnostics/Component Tests/Evaporative Emission
System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Component Tests/Evaporative Emission Repair Verification Drive Cycle
NOTE: Lubricate all evaporative emission O-ring seals with MERPOL(R) O-ring Seal Lubricant or equivalent meeting Ford specification
ESE-M99B144-B.