F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
INSTALLATION
1. Carefully clean both sealing surfaces.
^
Install a new gasket.
NOTE: The EGR valve sealing surfaces are soft metal.
2. Install the EGR valve (if equipped).
^
Tighten the bolts in two stages.
^
Stage 1: Tighten the bolts to 20 Nm (15 Lb-Ft).
^
Stage 2: Tighten the bolts an additional 90 degrees.
3. Connect the vacuum line.
