F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
2
Position the shoulder safety belt guide to the height adjuster.
3
Install the nut.
4
Close the shoulder safety belt guide cover.
NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or cover does not remain
closed, install a new shoulder safety belt guide cover.
SuperCab vehicles
21. Install the door scuff plate.
Regular cab vehicles
22. Install the corner trim panel.
23. Install the shoulder safety belt guide. Close the shoulder safety belt guide cover.
NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or cover does not remain
closed, install a new shoulder safety belt guide cover.
All vehicles
24. Restore the vehicle to operating condition.
1
Reactivate the supplemental restraint system (SRS).
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES,
AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM DEACTIVATION/REACTIVATION PROCEDURE.
Refer to Air Bag(s) Arming and Disarming.
2
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE
FROM THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE
VIOLATION OF VEHICLE SAFETY STANDARDS.
3
Check the active restraint system for correct operation.
