F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
Axle Beam: Service and Repair
Axle - F-450, F-550
Special Tool(s)
Removal and Installation
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major
service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement part of
lesser quality or substitute design. Torque values must be used as specified during reassembly to ensure proper retention of these parts.
1. Raise and support the vehicle.
2. Remove the front wheels and tire assemblies.
3. Remove the front disc brake calipers and position out of the way.
4. If equipped, disconnect the front disc brake ABS sensor harness connectors and position harness out of the way.
5. Using a suitable jack, equipped with safety chains, support the front axle.
6. Remove the front shock absorbers.
7. Remove and discard the nuts from the stabilizer bar mounting brackets to axle, and position out of the way.
