F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorber
Shock Absorber - F-450, F-550
Removal
WARNING: All vehicles are equipped with gas-pressurized shock absorbers which will extend unassisted. Do not apply heat or flame to the
shock absorbers during removal or component servicing.
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major
service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement part of
lesser quality or substitute design. Torque values must be used as specified during reassembly to ensure proper retention of these parts.
1. Raise and Support the vehicle.
2. Remove the wheel and tire assembly.
3. Using a suitable jack, support the front axle assembly.
4. Remove the upper shock absorber retaining bolt.
5. Remove the lower shock absorber retaining nut and bolt. Remove the shock absorber.
Installation