F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
2. Install the fluid cooler tubes in the front and rear cooler line case fittings.
3. Position the air deflector and install the bolts.
4. Position the skid plate and install the bolts (4x4 only).
5. Lower the vehicle.
6. CAUTION: Do not use any fluid approved for MERCON V application. Using a fluid rated for MERCON V can cause internal damage in
"MERCON only" applications.
Fill the transmission with the specified type and quantity of transmission fluid.
7. Check for leaks.
TorqShift
Transmission Fluid Cooler Tubes-TorqShift
Special Tool(s)