F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
1. Route the new antenna lead-in cable into the passenger compartment.
-
Make sure the grommet is fully seated.
2. Route and secure the new antenna lead-in cable to the instrument panel reinforcement.
3. Install the audio unit.
4. Install the pin-type retainer and the lower RH A-pillar trim panel.
5. Route the antenna cable through the antenna base opening on the cowl.
6. Position the RH front fender splash shield to the bulkhead.
1
Install the 2 nuts.
2
Install the screws.
3
Install the pin-type retainers.
7. Install the antenna base.
