F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
12. Remove 2 headliner front pin-type retainers.
13. Remove the 2 headliner rear pin-type retainers.
14. CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so
may cause the retractor to lock and not release the safety belt.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Lift up on the cover and remove the front and rear seat nut and shoulder safety belt guides.
-
To install, tighten to 40 Nm (30 lb-ft).
15. Remove the front and rear door scuff plates.