F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
4. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Remove the shoulder safety belt guide bolt.
3
Remove the shoulder safety belt guide.
-
To install, tighten to 40 Nm (30 lb-ft).
5. Remove the safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
6. Remove the B-pillar trim panel.
7. Route the front safety belt and the shoulder belt guide through the B-pillar trim panel.
