F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
9. Remove the 3 trim support wire screws securing the trim cover side face to the seat track riser.
10. Disconnect the power seat switch electrical connector and the seat actuator motors electrical connector. Release the electrical connectors from
their cushion pan attachments.
All seats
11. Remove the 4 seat cushion pan attachment bolts. Lift off the seat cushion assembly.
Installation
All seats
1. NOTE: Make sure loose square reinforcement stampings are inserted between cushion pan front attachments and support brackets.
