F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Brake Bleeding: Service and Repair
Anti-Lock Brake System Hydraulic Control Unit (HCU)
Anti-Lock Brake System Hydraulic Control Unit (HCU)
NOTE: This procedure only needs to be carried out if a new anti-lock brake hydraulic control unit (HCU) has been installed or if air is suspected in
the HCU.
1. Carry out the brake system bleeding procedure.
2. Connect the diagnostic tool DCL cable adapter into the vehicle data link connector (DLC) under the dash and follow the diagnostic tool
instructions.
3. Repeat the brake system bleeding procedure.