F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Brake Rotor/Disc: Service and Repair
Disc Removal and Installation, Rear
Brake Disc
Brake Disc
Removal and Installation
Dual rear wheel brake disc
1. NOTE: The brake disc is part of the hub on all dual rear wheel axle applications.
Remove the wheel bearing and hub assembly.
2. Remove the disc-to-hub bolts.
^
To install, tighten to 121 Nm (89 ft. lbs.).
Single rear wheel brake disc
3. CAUTION: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.
Remove the anchor plate bolts and position the brake caliper and anchor plate assembly aside.
^
Support the caliper and anchor plate using mechanic's wire.
^
To install, tighten to 275 Nm (203 ft. lbs.).
4. Separate the brake disc from the hub.
5. To install, reverse the removal procedure.
