F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Remove the wire form bracket bolt from the frame rail and release the conduit from the frame guide.
^
To install, tighten to 40 Nm (30 ft. lbs.).
4. Remove the parking brake cable bracket bolt from the shock bracket.
^
To install, tighten to 20 Nm (15 ft. lbs.).
5. Remove the parking brake cable bracket bolt from the lower shock mount.
^
To install, tighten to 20 Nm (15 ft. lbs.).
6. Release the parking brake cable from the RH parking brake bracket assembly.
7. Rotate the cable 90 degrees to release it from the parking brake actuating lever and remove the cable.
8. To install, reverse the removal procedure.
