F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
6. Remove the 2 upper shroud bolts. To install, tighten to 6 Nm (53 inch lbs.).
7. Disconnect the upper radiator hose and the radiator overflow hose.
^
Tighten to 6 Nm (53 inch lbs.).
8. Remove the shroud.
^
Move the radiator forward.
^
Pull up on the shroud evenly, and remove the shroud from the radiator.
9. NOTE: When installing the shroud, make sure that the aligning tabs are installed correctly in the slots.
To install, reverse the removal procedure.
