F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
34. NOTE: It is necessary to remove the oil filter and drain the housing.
Remove the 4 bolts and the oil filter housing.
^
Remove and discard the O-ring seal.
35. Remove the bolt and the oil filter return tube.
36. Remove the fuel tube.
^
Remove the bolt and the banjo fitting from the fuel tube.
^
Discard the sealing washers and remove the fuel tube.
37. NOTE: Align the flat edge with the index feature located on the coolant supply port.
Pull the EGR cooler clamp forward, twist and then slide the EGR cooler hose rearward to remove.
