F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
All vehicles
3. Remove the flexplate or flywheel.
^
Remove and discard the bolts.
^
Remove the flexplate or flywheel.
4. NOTE: Use extreme care when removing the flywheel front adapter to prevent damage to the alignment dowel pin.
Remove the flywheel front adapter.
5. CAUTION: To prevent engine damage, do not remove the rear primary crankshaft flange bolts under any circumstances. If the flange is removed
and reinstalled, it will result in engine vibration and premature transmission component wear.
Punch 2 holes in the crankshaft rear seal, across from each other.
