F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
2. Remove the A/C clutch disc and hub retaining bolt.
1
Hold the A/C clutch disc and hub with the special tool.
2
Remove the bolt.
3. Remove the A/C clutch disc and hub, and the A/C clutch disc and hub spacer.
1
Thread an 8 x 1.25 mm bolt into the A/C clutch disc and hub to force it from the A/C compressor shaft.
2
Lift the A/C clutch disc and hub, and the A/C clutch disc and hub spacer from the compressor shaft.
4. Remove the shaft seal felt from the nose of the A/C compressor with the special tool.
5. Clean the compressor nose area.
6. Insert the tip of the special tool into one of the snap ring eyes.
