F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
2. Remove the 9 pin-type retainers and remove the sight shield.
3. Remove the air deflector.
4. Disconnect the A/C condenser core inlet and outlet lines.
-
To install, tighten to 8 Nm (71 lb-in).
-
Discard the O-ring seals.
5. NOTE: Mark the location of the hood latch for realignment at assembly.
Remove the screws and reposition the hood latch.
-
To install, tighten to 12 Nm (9 lb-ft).