F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Manifold Pressure/Vacuum Sensor: Service and Repair
MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR
Removal and Installation
1. CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls.
Turn the ignition switch to the OFF position.
2. Disconnect the manifold absolute pressure (MAP) sensor.
-
Disconnect the pressure hose.
-
Disconnect the electrical connector.
3. Remove the mounting screws and the MAP sensor.
4. To install, reverse the removal procedure.
