F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Fuel Injector Seat Adapter: Service and Repair
FUEL INJECTOR SLEEVE
Special Tool(s)
Special Tool(s)
Removal
1. NOTE: To install a new fuel injector sleeve, the cylinder heads must be removed from the vehicle.
Remove the cylinder heads from the engine.
2. Remove the lifting bracket from the cylinder head.
3. NOTE: Early build engines will have 4 rocker arm carrier to cylinder head bolts. Late build will have 2 rocker arm carrier to cylinder head bolts.
NOTE: Early build shown, late build similar.
