F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
5. Disconnect the fuel hoses.
1
Remove the fuel hose retaining clips and discard. Disconnect the fuel hoses from the fuel pump.
2
Press in the retaining clips and release the fuel hoses.
6. Remove the mounting nuts and the fuel conditioning module.
-
To install, tighten to 15 Nm (11 lb-ft).
7. To install, reverse the removal procedure.
Fuel Pressure Regulator
FUEL PRESSURE REGULATOR
Removal and Installation
1. Remove the secondary fuel filter and remove all fuel from the fuel filter housing.
