ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

06-22-12 > < Engine Controls - Steady Speed Buck or Jerk
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - MIL ON/DTC's P2138/P2139/P2140

TSB 06-22-9

11/13/06

6.0L - MIL ON WITH DTC P2138, P2139, AND P2140

FORD:
2005-2006 E-350, E-450
2005-2007 F-Super Duty

This article supersedes TSB 06-13-10 to update the vehicle model years coverage.

ISSUE
Some 2005-2006 E-Series vehicles built through 6/12/2006 and 2005-2007 F-Super Duty vehicles built through 6/5/2006, equipped with a 6.0L diesel
engine may exhibit the malfunction indicator lamp (MIL) on with diagnostic trouble codes (DTCs) P2138 P2139, and P2140.

ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release IDS-45.8 and higher. This new calibration is not included in
the 2006.9 DVD. This calibration contains a revised strategy to eliminate the occurrence of a false P2138, P2139, or P2140. Calibration files may also
be obtained at the website. Follow normal diagnostics if any of these DTCs still occur after reprogramming.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage

OPERATION

DESCRIPTION

TIME

062209A

2005-2007 F-Super Duty

0.7 Hr.

6.0L 2005-2006 Econoline
6.0L: Check For DTCs And
Reprogram The PCM (Do
Not Use With 12650D,
12650D84)

MT062209

Use SLTS Operations If

Actual

Available; Claim Additional

Time

Diagnosis Or Labor
Performed As Actual Time

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECALEM

04

Disclaimer

06-22-12 > < Engine Controls - Steady Speed Buck or Jerk