F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION (CKP) SENSOR
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls.
Turn the ignition switch to the OFF position.
3. NOTE: The crankshaft position (CKP) sensor is located underneath the air conditioning compressor.
Remove the nut and position the positive battery cable and support bracket aside.
-
To install, tighten to 30 Nm (22 lb-ft).
