F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Inertia Fuel Shutoff Switch: Service and Repair
INERTIA FUEL SHUTOFF (IFS) SWITCH
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the RH cowl side trim panel.
3. Remove the inertia switch retaining bolts (2 required).
-
To install, tighten to 10 Nm (89 lb-in).
4. Remove the inertia switch.
5. To install, reverse the removal procedure.
