F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Vehicles equipped with a fixed yoke
7. Using the special tool, install the output shaft retaining nut.
^
Tighten to 200 Nm (148 ft. lbs.).
All vehicles
8. Connect the OSS sensor electrical connector.
9. Lower the transmission onto the rear mount and install the bolts.
^
Tighten to 94 Nm (69 ft. lbs.).
Vehicles equipped with a fixed yoke
10. Install the output shaft flange and a new bolt.
^
Tighten to 135 Nm (100 ft. lbs.).
4x2 vehicles