F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Transmission Cooler: Symptom Related Diagnostic Procedures
Diagnosis By Symptom
Symptom Chart - Automatic Transmission
Symptom Chart - Automatic Transmission
Non-Trouble Code Procedures
Transmission Fluid Cooler
Special Tool(s)
NOTE: Cleaning and backflushing the transmission fluid cooling system along with following all the normal cleaning and inspection procedures
during disassembly and reassembly will keep contamination from entering the transmission, causing a repeat repair.
When internal wear or damage has occurred in the transmission, metal particles or clutch plate material may have been carried into the torque
converter and transmission fluid cooler. These contaminants are a major cause of recurring transmission troubles and must be removed from the
system before the transmission is put back into use.
Transmission Fluid Cooler Flow Test
NOTE: The transmission linkage/cable adjustment, fluid level and line pressure must be within specification before carrying out this test. Refer to
Fluid Level Check under Verification of Condition. Refer to Line Pressure Test under Special Testing Procedures. For shift linkage/cable adjustment
procedures, refer to A/T external controls. See: Transmission Control Systems/Testing and Inspection/Initial Inspection and Diagnostic