F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
2. Remove the window crank handle.
1
Position the window crank handle cover aside.
2
Remove the window crank handle retaining screw and the window crank handle.
All vehicles
3. Remove the door trim panel.
4. Remove the door speaker.
5. NOTE: Do not remove the window glass from the door.
Remove the window glass from the window regulator.
6. Tape the window glass in the full UP position.
7. Disconnect the window motor electrical connector (power windows only).
8. Loosen the window regulator arm nuts and pull the arm from the mounting position.
-
To install, tighten to 13 Nm (10 lb-ft).
