F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
4. NOTE: Do not remove the window glass from the door.
Remove the window glass from the window regulator.
5. Tape the window glass in the full UP position.
6. Disconnect the window motor electrical connector (power windows only).
7. Loosen the nuts and pull the rear door window regulator from the mounting position.
-
To install, tighten to 13 Nm (10 lb-ft).
8. Remove the rear door manual window regulator from the door.
9. To install, reverse the removal procedure.