F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
^
Stage 1: Tighten the nut to 10 Nm (89 lb-inch).
^
Stage 2: Loosen the nut 720 degrees (2 complete turns).
^
Stage 3: Tighten the nut to 8 Nm (71 lb-inch).
5. Tighten the lower EGR cooler bracket bolt.
^
Tighten to 62 Nm (46 lb-ft).
6. Connect the upper radiator hose to the thermostat housing. Install the spring clip.
^
Verify the spring clip is correctly seated.
7. Install the degas bottle.
8. Install the upper cooling fan shroud.