F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
17. Install the CAC inlet tube.
^
Tighten to 12 Nm (9 ft. lbs.).
18. Install the upper fan shroud. For additional information, refer to Cooling System.
19. Install the air cleaner. For additional information, refer to Fuel Delivery and Air Induction.
20. Position the transmission fluid cooler tube assembly bracket onto the stud and install the nut.
^
Tighten to 11 Nm (8 ft. lbs.).
21. Install the front transmission fluid cooler tube assembly and connect the front cooler tube assembly retainer to the frame rail.
22. Connect the transmission fluid cooler tube assemblies.
23. Install the front fluid cooler tube assembly secondary latches.
24. Connect the front transmission fluid cooler tube assembly hoses to the radiator in-tank cooler and the auxiliary cooler.
25. Fill with clean automatic transmission fluid and check for leaks.
