F 450 4WD Super Duty V10-6.8L (2009)
Parking Brake Shoe: Adjustments
Parking Brake Shoe Adjustment
1. NOTE: Make sure that the parking brake is fully released.
With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the brake adjusting hole cover from the backing plate.
3. Turn the brake adjuster screw to expand the parking brake shoe and linings until they drag against the drum-in-hat brake disc.
4. Back off the brake adjuster screw until no drag is evident.
5. Install the brake adjusting hole cover into the backing plate.
