F 450 4WD Super Duty V10-6.8L VIN D (2004)
Body Control Module: Service and Repair
VEHICLE SECURITY MODULE
REMOVAL
CAUTION:
-
Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
-
Prior to the removal of the module, it is necessary to upload module configuration information to the appropriate diagnostic equipment.
This information needs to be downloaded into the new module once installed.
1. Disconnect the battery.
2. Remove the lower center dash trim panel.
3. Disconnect the vehicle security module electrical connectors.
4. Remove the wiring harness retainer from the LH stud.
5. Remove the LH nut.
