F 450 4WD Super Duty V10-6.8L VIN D (2004)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch
LIFTGATE LATCH
REMOVAL
1. Remove the liftgate trim panel.
2. Remove the liftgate latch screws.
3. Release the liftgate latch cable locators.
4. Position the liftgate latch aside.
5. Remove the liftgate latch.
1
Disconnect the door ajar switch electrical connector.
2
Remove the liftgate latch cable cover.
3
Release the cable conduit and the cable.
INSTALLATION
1. NOTE: Transfer parts as necessary.
To install, reverse the removal procedure.