F 450 4WD Super Duty V10-6.8L VIN D (2004)
Body / Frame Mount Bushing: Service and Repair
Body Support - Front Radiator Support Lower
BODY SUPPORT-FRONT RADIATOR SUPPORT LOWER
Removal and Installation
NOTE: Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
1. Remove and discard the nut and bolt.
-
During installation, install a new bolt and nut.
2. Remove the lower mount.
3. NOTE: No lubricants of any kind are to be used during body insulator installation.
To install, reverse the removal procedure.
