F 450 4WD Super Duty V10-6.8L VIN D (2004)
9. If equipped, remove the safety belt shoulder height adjusters.
1
Position the safety belt shoulder height adjuster cover down.
2
Remove the bolt.
3
Remove the safety belt shoulder height adjuster.
Crew Cab vehicles
10. Remove the rear B-pillar assist handles.
1
Remove the four covers (two on each handle).
2
Remove the four screws (two on each handle).
3
Remove the two B-pillar assist handles.
11. CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so
may cause the retractor to lock and not release the safety belt.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
Lift up on the cover and remove the front and rear seat nut and shoulder safety belt guides.
