F 450 4WD Super Duty V10-6.8L VIN D (2004)
11. Remove the two courtesy lamps.
-
Remove the courtesy lamp lens, then remove the screws.
12. Remove the two headliner front pin-type retainers.
13. Remove the two headliner rear pin-type retainers.
14. CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so
may cause the retractor to lock and not release the safety belt.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
Lift up on the cover and remove the front and rear seat nut and shoulder safety belt guides.
