F 450 4WD Super Duty V10-6.8L VIN D (2004)
4. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Use the Seat Belt Bolt Bit to remove the bolt.
3
Remove the shoulder safety belt guide.
5. Remove the safety belt anchor.
1
Use the Seat Belt Bolt Bit to remove the bolt.
2
Remove the safety belt anchor.
6. Remove the rear corner trim panel.
7. Route the safety belt and the shoulder safety belt guide through the rear corner trim panel openings.
INSTALLATION
1. To install, reverse the removal procedure.
Trim Panel - Body Side to Roof Moulding
TRIM PANEL - BODY SIDE TO ROOF MOULDING
REMOVAL
1. NOTE: Step one applies to SuperCab and Crew Cab only.
Remove the rear seat.
2. Remove the rear safety belt retractor and tongue.
3. Remove the rear corner trim panel.
