F 450 4WD Super Duty V10-6.8L VIN D (2004)
Truck Bed: Service and Repair
Pickup Bed
PICKUP BED
Removal and Installation
1. Remove the tailgate.
2. Remove the tail lamps.
3. Remove the rear bumper.
4. Disconnect the rear tail lamp electrical connector.
5. Remove the rear tail lamp wiring harness from the pickup bed.
6. Remove the screws (8 ft. bed shown, 6 ft. bed similar).
7. Loosen the fuel filler assembly hose clamps, then position the fuel filler assembly aside.
